Hi,
is anybody making a success to run a djgpp program (32bits protected mode) without Emm386.exe with USB Driver. I don't use Emm386 because it limited to 64MB of RAM Memory in my program but I have 2GB memory and I need more 64MB to run my program (minimum 512MB, I have a lot of data in memory!). BUt I have only 450KB for the DOS memory. It seems between CWSDPMI (extender from djgpp) and USB driver there are problems to allocate DOS memory or there is not enough DOS memory for my program ! I only need 50KB but it seems there is not any more ! see mem command:
"
Modules using memory below 1 MB:
Name Total Conventional Upper Memory
-------- ---------------- ---------------- ----------------
SYSTEM 60,480 (59K) 60,480 (59K) 0 (0K)
COMMAND 78,032 (76K) 78,032 (76K) 0 (0K)
KEYB 1,472 (1K) 1,472 (1K) 0 (0K)
USBUHCIL 29,712 (29K) 29,712 (29K) 0 (0K)
USBDRIVE 17,264 (17K) 17,264 (17K) 0 (0K)
KEYBDATA 752 (1K) 752 (1K) 0 (0K)
Free 463,424 (453K) 463,424 (453K) 0 (0K)
Memory Type Total Used Free
---------------- -------- -------- --------
Conventional 636K 183K 453K
Upper 0K 0K 0K
Reserved 388K 388K 0K
Extended (XMS) 3,134,016K 3,134,016K 0K
---------------- -------- -------- --------
Total memory 3,135,040K 3,134,587K 453K
Total under 1 MB 636K 183K 453K
Largest executable program size 451K (461,728 bytes)
"
does anybody have an idea ?